Our Team
Tuesday, June 7 by Ong Ding Shan in Labels:



Above is a photograph of our group with our project supervisor Asst Prof Ali Miserez:
From left to right: Ong Ding Shan (206), Wan Ray Chow (leader of the team; 206), Asst Prof Ali Miserez, from the Division of Materials Technology, Ho Yan Jin (203), Dionne Choo (207)

Our Mission
by Ong Ding Shan in Labels:

(A) Tensile Testing of Engineering Materials

1) To understand different mechanical properties of materials.
2) To observe how the three types of materials behave in their mechanical properties under the tensile and bend test.
3) To understand the major factors which determine those mechanical properties.

We will learn how to use a universal tensile testing machine to conduct tests on distinct class of materials, such as a common polymeric materials (Polyethylene Terephtalate, PET), high performance Kevlar fibers, and a light-weight aluminium alloy. We will analyze the data, extract the critical properties, and discuss them for each class of materials.

(B) Scanning Electron Microscope

The main objective of this activity is to get familiar with the Scanning Electron Microscope (SEM) and the most common detectors used to collect images and chemical data of materials.
The objectives will be a basic understanding and assimilation of the following:
1) Basics of Scanning Electron Microscopy theory and instrumentation
2) Basics of Signal Detection theory and instrumentation for Secondary Electrons (SE), Backscattered Electrons (BSE) and Energy Dispersive X-ray (EDX) detectors.

Outcome: To learn about scanning electron microscope through the use of stimulations

We will learn about the Scanning Electron Microscope (SEM) which is an important and routine tool in materials science. The SEM allows for visualization of topographical as well as chemical contrasts of materials at the sub-micron scale. We will understand electron/matter interactions and how such interactions are exploited to create images of materials surfaces. The physical principles of SEM operation, including generation of electron, magnetic lenses, and detector, will be introduced. We will have access to a virtual SEM which allows them to learn the operation principles of scanning electron microscopy without any risk of equipment damage.

(C) Composite Material Processing

The objective for this experiment is to introduce materials processing to the students. In this case, it is in composite materials.
1) To understand what is composite materials and how to fabricate them
2) To appreciate the applications of composite materials in daily life
3) To appreciate the mechanical properties of composites

We will be introduced to materials processing. We will prepare a glass-fiber reinforced composite materials such as used in aeronautic or sport good applications. Starting from pre-fabricated glass matt fibers, We will learn how to impregnate the matt with the resin matrix and cure the construct in order to create the final composite part. If time permits, the mechanical properties of the composite sample will be tested.


We are supposed to create a Blog, Report and Presentation Slides on the things that we learnt.

Overview of the Project
by Ray in Labels:

(A) Tensile Testing of Engineering Materials
Different types of materials have different microstructures (structure at the sub-milimetre level), which directly control their different mechanical properties. The exploration and mapping of those properties allows the right materials to be selected and used in the right application.

Three broad categories of materials are commonly used in engineering: metals, ceramics and polymers, as well as combination of those (composite materials). This experiment aims to study mechanical properties of three materials and also to demonstrate the factors that affect the mechanical strength of the materials.

Knowledge
Tensile testing is the application of a force to a material until it fails (stretching a material until it breaks). Tensile stress is the instantaneous load applied to a specimen divided by its cross sectional area before any deformation, and the formula is σ = F / Ao . Young's Modulus (E) is the ratio of stress to strain when deformation is totally elastic (initial linear region), with the formula as E = σ / ε or stress / strain.
The figure to the left is a typical stress-strain curve.
*Ultimate Tensile Strength: maximum stress before fracture
* Ductility: measure of a material's ability to undergo appreciable plastic deformation before fracture
* Toughness: measure of the amount of energy absorbed by a material as it fractures
* Elastic vs. Plastic region: an item stretched in the elastic region can return to original state, but an item stretched in the plastic region will be deformed

Objectives
1. To understand different mechanical properties of materials
2. To observe how the three types of materials behave in heir mechanical properties under the tensile and bend test
3. To understand the major factors which determine those mechanical properties

(B) Scanning Electron Microscope (SEM)
Electron Microscopes were developed due to limitations of Light Microscopes which are restricted by the physics of light to 500x or 1000x magnification and a resolution of 0.2 micrometers where human hair is around 0.1 micrometers.

The first Scanning Electron Microscope (SEM) debuted in 1942, uses a beam of highly energetic electrons to examine objects on a very fine scale. The sample examined is swept by the electron beam across its surface. The signals generated by interaction of the electron beam with the sample are collected by a variety of detectors, which provide us the topography (the surface feature and its texture), morphology (the shape and size of the particles making up the object) and composition (the chemical elements and compounds).

Knowledge
We used a virtual SEM that simulates the real SEM for safety fears and space limitations.








Objectives
1. Basics of Scanning Electron Microscopy theory and instrumentation
2. Basics of Signal Detection theory and instrumentation for Secondary Electrons (SE), Backscattered Electrons (BSE) and Energy Dispersive X-ray (EDX) detectors

(C) Composite Material Processing
A composite material is a combination between two or more materials. It has the desirable properties which cannot be obtained by either of the constituent materials acting alone.

Knowledge
Composite materials are used because they are cheaper, lighter, stronger, has favourable properties (as determined by the manufacturer) and relatively easy to shape (during the processing stage). Some applications of composites include airplanes and sports equipments.

There are three types of composites: Dispersion Strengthened Composites (Examples are aluminum oxide, silicon carbide reinforced aluminum, which are used in high-performance bicycle frames), Particle-reinforced Composites (Examples are plastic which contain filler materials, and carbide cutting tools) and Fiber-reinforced Composites (Examples are fiberglass and carbon-fiber composites, used in high-performance air craft and sports equipment). We will be dealing with fiber-reinforced composites in this experiment.

Objectives
1. To understand what is composite materials and how to fabricate them
2. To appreciate the applications of composite materials in daily life
3. To appreciate the mechanical properties of composites

Our Accomplishment
by Ray in Labels:

This section will include tables of data, observation and findings, as well as questions regarding the projects.

(A) Tensile Testing of Engineering Materials

Tables of data:
Above is a picture taken of the data. The tables are typedbelow; The graph shows the line of three material samples, the aluminum sample (Grey), polystyrene sample (Transparent) and polyethylene sample (Yellow).



Thickness

Width

Gauge Length (Before)

Gauge Length (After)

Units

mm

mm

mm

mm

Yellow

4.0400

10.0600

110.7900

11.7000

Transparent

4.0600

10.3500

114.3600

13.5000

Metal

2.0100

10.0100

103.4000

11.1000


Name

Max force

Max distance

Units

kN

mm

Yellow

0.42141

89.0510

Transparent

1.35438

1.91500

Metal

4.65681

6.77500



Analysis of results (Table and graph):

Polyethylene material (Yellow): Plastic deformation under fracture; High strain; breaking point was soon after reaching the Ultimate Tensile Strength (UTS).

Break surface: Stretched and elongated. Thus we can conclude that it is ductile.



Polystyrene material (Transparent): Little elongation and plastic deformation can be found upon fracture; Low strain; Broke at the UTS.

Break surface: clean and flat. Thus we can conclude that it is brittle.



Aluminium-copper alloy (Metallic): Some plastic deformations upon fracture; Low strain; Broke shortly after reaching UTS.

Break surface: Slightly stretched and elongated. Because so, we conclude that it is in between brittle and ductile, but more towards brittle.




Questions to answer:

Bonus) Compare the break surface of 3 samples, and guess the relationship between ductility and break surface.

The more ductile a material is, the larger value of strain it has upon fracture. A brittle material undergoes little or no plastic deformation upon fracture compared to a ductile material. The more ductile a material is, after fracture, the more uneven the break surface will be. The more brittle a material is, after fracture, the more even and flat the break surface will be.


1) Why are there variations in mechanical properties of materials of the same type?

Even though materials are made up of the same elements or type, the bonding of elements, microstructures and molecular structure varies between different materials of the same type. An example is polyethylene and polystyrene. They are both polymers, but polyethylene is more ductile compared to polystyrene.


2) What difference exists in mechanical properties of different materials?

Ductility: Polyethylene is the most ductile, followed by aluminum copper alloy and polystyrene.

Toughness: The more the area from the start to the breaking point of the graph, the more tough the material is. Both aluminum copper alloy and polyethylene have the highest toughness, followed by polystyrene.


3) What is the major difference between polymer and metals in terms of mechanical behaviour?

Metals are usually more brittle, where the material stretches and elongates less compared to other materials. On the other hand, Polymers have a wide range of different properties, depending on the bonding of elements and microstructures of it.


(B) Scanning Electron Microscope

Tables of data (Titania):

The picture shows data taken from Titania when doing area analysis in EDS/EDX, which is used to detect chemical compounds.






Tables of data (Carbon Nano-tube):










The data on the left shows a graph of the different chemical compounds in a part of the Carbon Nano-tube. The data on the right shows the percentage of elements found in that area.


Tables of data (Solder):









The data on the left shows the overall picture of the Solder, and different points can be selected. The data on the right shows the chemical composition at the +001 point.


Tables of data (Srilankite):









The data on the left shows the overall scan of the Srilankite, where like in the Solder, different points can be selected. The data on the right shows the chemical composition and other data at the +002 point.


The stimulation for the guide to the Electron Microscope can be found here: http://webserver.mse.ntu.edu.sg/omni/vsem/

The stimulation for scanning electron microscope and the screenshots taken can be found here: http://webserver.mse.ntu.edu.sg/omni/vsem/ivsem/index.html

Questions to answer:
1) What do you think may be caused if there is too much moisture on the specimen?
If there is too much moisture on the specimen, when the electron gun fires on the specimen plate, the readings might be inaccurate as they might come from the water content instead of the specimen.

Backscattered electrons might not be produced or detected.

2) What is the working distance and accelerate voltage if the specimen is titanium?
If the specimen is titanium, the accelerate voltage is 10-15kV and the working distance is 10 mm.

3) Why can't we heat the filament too fast?
It will blow and break prematurely.

(C) Composite Material Processing
Logsheet (Calculations taken during the experiment):

Weight of fiber matt (Calculated from epoxy required): 30 / 62.5% = 4.8g
Weight of fiber matt (Calculated from hardener s
olution required): 20 / 37.5% = 5.3g
Average/Total weight of fiber matt used = 4.8 + 5.3 / 2 = 5.1g

Weight of epoxy required = 30g
Weight of hardener solution required = 20g

Question created by us to answer:
1) Why is the teflon sheet, plastic sheet and tissue paper needed to be above and below the fiber and epoxy?

Teflon sheet is used because it is hard for epoxy to pass through it, thus the epoxy would not mess up the work space. Tissue paper and plastic sheet, we believe, is used for extra protection in case the epoxy goes through the teflon layer.

2) Why is it necessary to stir and mix the epoxy and hardener solution for quite a long time?

Both solutions are viscous and thick, which makes them harder to mix evenly. Also, epoxy requires the mixture of hardener solution with to be working at its optimal level. Thus, it is crucial to stir and mix it well for the layers of carbon/glass fiber to stick well.


3) Why are most materials are only made up of 30-40% of composite materials?

Composite materials are known for their strong and hard properties, thus, it makes it brittle and some applications of the airplane wings, which have to be a bit flexible, or it will be easily destroyed in pressure/resistance.